Used CNC Machinery - Machine Tools » CNC http://jspetersmach.com/blog Buying and Selling of Used CNC Machinery and Machine Tools - Turning - Machining - Grinding Fri, 03 Feb 2012 19:25:29 +0000 http://wordpress.org/?v=2.8.3 en hourly 1 Emco Hyper Turn 665 MC Used CNC Turning Center http://jspetersmach.com/blog/2012/02/emco-hyper-turn-665-mc-used-cnc-turning-center/ http://jspetersmach.com/blog/2012/02/emco-hyper-turn-665-mc-used-cnc-turning-center/#comments Fri, 03 Feb 2012 19:25:29 +0000 Administrator http://jspetersmach.com/blog/?p=632 Emco Hyper Turn 665 MC Used CNC Turning Center

Emco_Hyper_Turn_665_Turning_Center_004

Specifications:

Swing Over Bed 23.62
Swing Over Cross Slide 19.68″
Distance Between Spindles 39.37″
Max Turn Diameter 16.92″
Max Turn Length 29.29″
Travel
X/X2 Axis 11″
X/X2 Axis 15.74″/8.07″
Z/Z2 Axis 29.5″/8.07″
Z/Z2 Axis 35.4″/28.52″
Z3 Axis 29.5″/29.52″
Y Axis 3.94″ (+/-1.97″)
C Axis .001
Bar Capacity Spindle 1 2.5″
Spindle Bore 1 2.87″
Spindle Bore 2 2.08″
Spindle Speed 1 5000 rpm
Spindle Speed 2 7000 rpm
Spindle Motor 1 38 HP
Spindle Motor 2 29 HP
# of Turrets 2
Tools on Each Turret 12 (all live)

Installed 2006 – Low Hours

Equipped With Siemens Sinumerik 840 D Control
Spindle Through Coolant
Part Ejector
Full C axis
2 Turret – 24 Live tools
Chip Conveyor
2 High Pressure Pumps – 200 psi
Emco Bar Loader
All Available Manuals of Tooling

To receive a quotation on this machine
click the Contact Us tab above

Used Emco HT 665 MC

]]> http://jspetersmach.com/blog/2012/02/emco-hyper-turn-665-mc-used-cnc-turning-center/feed/ 0 Used Mori Seiki MV80B CNC Vertical Machining Center http://jspetersmach.com/blog/2011/10/used-mori-sieki-mv80b-cnc-vertical-machining-center/ http://jspetersmach.com/blog/2011/10/used-mori-sieki-mv80b-cnc-vertical-machining-center/#comments Thu, 06 Oct 2011 14:23:45 +0000 Administrator http://jspetersmach.com/blog/?p=629 Mori Seiki MV 80B Vertical Machining center

Mori Seiki MV 80B Vertical Machining center

USED Mori Seiki MV 80B w/ Fanuc MF-M5 CNC Control, New 1996
Specifications:
Control: Fanuc MF-M5
Table Size 30″ x 80″
Vertical Travel 30″
Automatic Tool Changer 80 Tools
Taper 50
Equipped With: Spindle Chiller
2 Pallet Changer
2 Chip Conveyors

To receive a quotation on this machine
click the Contact Us tab above

Used Mori MV 80B

]]> http://jspetersmach.com/blog/2011/10/used-mori-sieki-mv80b-cnc-vertical-machining-center/feed/ 0 used Danobat creep feed CNC grinder – MC1 800 CF http://jspetersmach.com/blog/2011/10/used_danobat_creep_feed_cnc_grinder/ http://jspetersmach.com/blog/2011/10/used_danobat_creep_feed_cnc_grinder/#comments Wed, 05 Oct 2011 15:45:38 +0000 Administrator http://jspetersmach.com/blog/?p=626 used danobat grinder

used danobat grinder

USED Danobat MC1-800-CF Creep Feed Profile Grinder
Specifications:

Year 2002
Table Size 31.5″ x 23.62″
X-Axis Travel 31.5″
Y-Axis Travel 18.5″
Z-Axis Travel 19.68″
Wheel Size 19.68″ x 8.74″ Max.
Wheel Speed 1000 – 5000 RPM

Equipped With Fanuc 160 CNC Control
Heidenhain Scales
Hydroflow Filtration System

To receive a quotation on this machine
click the Contact Us tab above

Used Grinders

]]> http://jspetersmach.com/blog/2011/10/used_danobat_creep_feed_cnc_grinder/feed/ 0 Star PTG 6 Tool and Cutter CNC Grinder http://jspetersmach.com/blog/2011/09/star-ptg-6-tool-and-cutter-cnc-grinder/ http://jspetersmach.com/blog/2011/09/star-ptg-6-tool-and-cutter-cnc-grinder/#comments Mon, 19 Sep 2011 15:08:04 +0000 Administrator http://jspetersmach.com/blog/?p=622 Star_PTG_6_tool_cutter_Grinder_001

USED Star PTG 6 Tool and Cutter Grinder New 2007
Specifications:

Max Diameter 10″
Max Length 26.5″
A Axis Spindle 1,000 RPM
B Axis Radial Travel 12.5 RPM
X Axis Travel 11.8″
Y Axis Travel 11.2″
Z Axis Travel 19.7″
Grinding Spindle Speed 10,000 RPM
Wheelhead Spindle Taper HSK
Max Wheel Size 6″

Equipped With Automatic Wheel Changer
Part and Wheel Probing
Cat 50 Workhead
Heidenhain Glass Scales
Oil Chiller
22 Wheel Arbors

Software: NUMROTO Plus
Endmills
Multiple-Helix
Step Drills
Differential Helix
Form Cutters
Wheel Profile Determination
3D Machine Simulation
Hardlock for Standalone Programming

To receive a quotation on this machine
click the Contact Us tab above

Used Grinders

]]> http://jspetersmach.com/blog/2011/09/star-ptg-6-tool-and-cutter-cnc-grinder/feed/ 0 Okamoto IGM 15NC Used CNC Grinder – Internal Grinding http://jspetersmach.com/blog/2011/08/okamoto-igm-15nc-used-cnc-grinder-internal-grinding/ http://jspetersmach.com/blog/2011/08/okamoto-igm-15nc-used-cnc-grinder-internal-grinding/#comments Tue, 09 Aug 2011 17:33:49 +0000 Administrator http://jspetersmach.com/blog/?p=617 Okamoto Internal Grinder

Okamoto Internal Grinder

USED Okamoto IGM-15 CNC Grinder
Specifications:

Swing 24″
Grinding Bore .24″-6″
Stroke 5″
Z-Axis Travel 20″
X-Axis Travel 6.7″
Workhead Swivel -5 to +15 degree
Spindle RPM 20,000 rpm

Equipped With Rotary Disc Dresser
Fanuc 18T Control
8″ Magnetic Chuck
Magnetic Separator

To receive a quotation on this machine
click the Contact Us tab above

Used Grinders

]]> http://jspetersmach.com/blog/2011/08/okamoto-igm-15nc-used-cnc-grinder-internal-grinding/feed/ 0 USED Kellenberger Kelvision URS CNC Grinder http://jspetersmach.com/blog/2011/08/kellenberger_kelvision_grinde/ http://jspetersmach.com/blog/2011/08/kellenberger_kelvision_grinde/#comments Mon, 08 Aug 2011 17:46:48 +0000 Administrator http://jspetersmach.com/blog/?p=612 Kellenberger URS Kelvision

Kellenberger URS Kelvision

USED Kellenberger Kelvision URS 125/430 CNC Grinder
Specifications:

Year 2002
Control Fanuc 18 TB
Grinding Length 16.9″
Center Distance 29.9″
Center Height 4.92″
Max Weight 220 lbs
Z-Axis Travel 5.59″
X-Axis Travel 12.59″
B-Axis Travel Manual every 2.5 degree
ID Spindle Speed 28,000 RPM
Wheel Size 16″x2.5″x5″

Equipped With ID Attachment
Paperband Filtration
Length Position Probe
Wheel Dressing for OD and ID
All Available manuals, tooling, and software
Prepped for Gauge Unit

To receive a quotation on this machine
click the Contact Us tab above

Used Kellenberger Grinders

]]> http://jspetersmach.com/blog/2011/08/kellenberger_kelvision_grinde/feed/ 0 Used Okuma GU-26S Cylindrical Grinder http://jspetersmach.com/blog/2011/07/used-okuma-gu-26s-cylindrical-grinder/ http://jspetersmach.com/blog/2011/07/used-okuma-gu-26s-cylindrical-grinder/#comments Tue, 19 Jul 2011 18:23:07 +0000 Administrator http://jspetersmach.com/blog/?p=608 Okuma grinder

Okuma grinder

USED Okuma GU-24S Universal Grinder
Specifications:
Swing 9.06″
Center Distance 9.84″
Max Weight 55 lbs
Wheel Spindle Speed 2120, 2420 RPM
B axis Swivel 0 to 90 deg.
Table Swivel +8.5/-0.5
Grinding Wheel Size 16″x2″x5″
Drive Motor 12.5″
Taper in Tailstock MT #4

Equipped With Swing Down ID Attachment
OSP-500 G-G Control
Filtration System
Hydraulic Chuck
4-Jaw Chuck

To receive a quotation on this machine
click the Contact Us tab above

Used Okuma Grinders

]]> http://jspetersmach.com/blog/2011/07/used-okuma-gu-26s-cylindrical-grinder/feed/ 0 Used Walter Heli Check Tool Measuring http://jspetersmach.com/blog/2011/07/walter_heli_check_tool_measuring/ http://jspetersmach.com/blog/2011/07/walter_heli_check_tool_measuring/#comments Fri, 01 Jul 2011 13:26:57 +0000 Administrator http://jspetersmach.com/blog/?p=606 Walter Helicheck tool measuring

Walter Helicheck tool measuring

Used Walter Heli Tool Check, New 2002

Equipped With: NT Software

To receive a quotation on this machine
click the Contact Us tab above

Used Grinding Equipment

]]> http://jspetersmach.com/blog/2011/07/walter_heli_check_tool_measuring/feed/ 0 Used DMG DMC 70V Vertical Machining Center http://jspetersmach.com/blog/2011/06/used-dmg-dmc-70v-vertical-machining-center/ http://jspetersmach.com/blog/2011/06/used-dmg-dmc-70v-vertical-machining-center/#comments Tue, 28 Jun 2011 14:13:17 +0000 Administrator http://jspetersmach.com/blog/?p=602 DMG DMC 70V machining center

DMG DMC 70V machining center

USED DMG DMC 70V hi-dyn Vertical Machining Center, New 2001
Specifications:

X-Axis Travel 27.5″
Y-Axis Travel 21.6″
Z-Axis Travel 19.7″
Spindle Taper CAT 40
Spindle Speed 30,000
ATC 60 Tools

Equipped With: Lehman Full 4th Axis
2 Pallet Changer
Heidenhein TNC 430 Control
Glass Scales
Blum Laser Tool Measuring
Heidenhein Probe
580 PSI Thru Spindle coolant
160 Gallon Coolant Tank
Paper band Filter
Spindle Chiller
Chip Conveyor

To receive a quotation on this machine
click the Contact Us tab above

Used DMG 70V

Used Machining Centers

]]> http://jspetersmach.com/blog/2011/06/used-dmg-dmc-70v-vertical-machining-center/feed/ 0 Okuma Crown L1060 Turning Center – CNC Machine Tool http://jspetersmach.com/blog/2011/06/okuma-crown-turning-center-l1060/ http://jspetersmach.com/blog/2011/06/okuma-crown-turning-center-l1060/#comments Tue, 14 Jun 2011 18:22:50 +0000 Administrator http://jspetersmach.com/blog/?p=597 Okuma Crown Turning Center

USED Okuma Crown L1060 CNC Turning Center, New 1999
Specifications:

Swing over bed 21.6″
Swing over Cross Slide 15.75″
Turning Dia. 10.6″
X Axis Travel 7.3″
Z Axis Travel 20.47″
Spindle Nose A2-6
Spindle Bore 2.2″
Spindle Speed 4,200 rpm
Motor 15 HP
Turret Stations 12

Equipped With OSP 700L Control
Parts Catcher
Chip conveyor
all available tooling and manuals

To receive a quotation on this machine
click the Contact Us tab above

okuma Crown

Used Machine Tools

]]> http://jspetersmach.com/blog/2011/06/okuma-crown-turning-center-l1060/feed/ 0